Lazrit
Use case

Lazrit for Laser Hobbyists: From Photo to Cut File

If you bought a laser to make things, not to learn Inkscape, Lazrit is for you. Three free exports get you through your first projects; paid tiers unlock volume and AI cleanup.

3 lifetime exports — no credit card.

Skip the Inkscape learning curve

Manual bridge placement, path validation, and layer setup take hours to learn and minutes to forget. Lazrit handles all three in a single workflow.

Material profiles for hobby lasers

10W diode, 40W CO2, 60W CO2 — Lazrit's defaults are tuned for the materials hobbyists actually run: 3 mm plywood, cast acrylic, paper, mylar.

Save a workflow, share with friends

Found the right bridge tuning for a project type? Save it as a workflow, share the public link with your maker group. Other hobbyists can apply it to their own uploads.

What people say

First time I cut a wedding sign with reversed-out text and didn't lose a single letter. That's worth $19/mo.

Mark T.Hobbyist · xTool D1

Frequently asked questions

Does Lazrit work with my 10W diode laser?

Yes — Lazrit produces SVG. Your laser's software handles power and speed. The topology and bridges are machine-agnostic.

Is the free tier enough for occasional projects?

If you cut once or twice a month, three lifetime exports won't last long. The Starter plan at $19/mo gives you 100 exports/month.

Can I cancel anytime?

Yes — billing is monthly with the Stripe customer portal. Cancel from your Account page in two clicks.

Related